#define ERRCODES_H
 put(0, "NOERR: "); 
 put(-1, "NOTINIT: Initialization failed; no camera connected"); 
 put(-2, "TIMEOUT: Timeout in any function"); 
 put(-3, "WRONGVAL: Function-call with wrong parameter"); 
 put(-4, "NOPCIDEV: Cannot locate PCI card"); 
 put(-5, "WRONGOS: "); 
 put(-6, "NODRIVER: "); 
 put(-7, "IOFAILURE: "); 
 put(-8, "NOCONNECTION: "); 
 put(-9, "INVMODE: Invalid Camera mode"); 
 put(-10, "NOPCIBIOS: no PCI Bios found"); 
 put(-11, "DEVICEBUSY: device is hold by an other process"); 
 put(-12, "DATAERROR: Error in reading or writing data to board"); 
 put(-13, "NOFUNCTION: "); 
 put(-14, "NODMABUF: cannot allocate DMA buffer"); 
 put(-15, "NORBT: Online.rbt File not found or load error"); 
 put(-16, "POLLERR: DMA Timeout"); 
 put(-17, "EVENTERR: creating Event failed"); 
 put(-20, "CAMERABUSY: LOAD_COC error (Camera runs Program-Memory)"); 
 put(-21, "OUTRAM: to many values in COC"); 
 put(-22, "WRONGTEMP: Camera Temperatur is out of Normal-Range wrong WINDOWS-Version"); 
 put(-23, "NOMEM: Buffer de/allocate error"); 
 put(-24, "READOUTRUN: Readout is running"); 
 put(-25, "NOBUFFLAG: Set/reset Buffer Flags failed"); 
 put(-26, "BUFINUSE: buffer is used"); 
 put(-27, "SYSERR: a call to a windows-function fails"); 
 put(-28, "DMARUN: try to disturb dma running"); 
 put(-29, "NOFILE: cannot open file"); 
 put(-30, "REGERR: error in reading/writing to registry"); 
 put(-31, "NODIALOG: no open dialog"); 
 put(-32, "WRONGVERS: need newer called vxd or dll"); 
 put(-33, "WRONGEXTSTAT: one of extended status bits shows an error"); 
 put(-34, "BOARDMEMERR: board memory has an error"); 
 put(-35, "WRONGCCD: function not allowed with this ccdtyp"); 
 put(-36, "DMAERROR: error in DMA from board to memory"); 
 put(-37, "FILE_READ_ERR: error while reading from file"); 
 put(-38, "FILE_WRITE_ERR: error while writing to file"); 
 put(-39, "CLEARBUF_ERR: "); 
 put(100, "NOPIC: picture-buffer empty"); 
 put(101, "UNDERPIC: picture to dark"); 
 put(102, "OVERPIC: picture to bright"); 
 put(103, "VALCHANGE: values changed in TEST_COC"); 
 put(104, "STR_SHORT: tab buffer to short in TEST_COC"); 
 put(120, "TESTSOFT: Lattice Testsoftware is loaded");